DESCRIPTION

Black Swan Tile Grout is a waterproof and mildew resistant.  Dries hard in one hour.  Won't shrink or crack. 

Tile Grout may be used extensively for grouting, sealing, and repairing sink tops, tile floors, and showers.  It may also be used to install towel racks, soap dishes, mosaic, etc. 


DIRECTIONS

  1. Clean surface of all dirt, soap and grease.
  2. Dampen tile joints with brush or wet sponge.
  3. Follow by wiping surface dry.

Add water to powder, stirring to a thick, soft, putty consistency. Use one part water to three parts powder.

  • Let mixture set for 10 -15 minutes.
  • Then apply grout to surface with putty knife, sponge, or hands, forcing  Tile Grout into joints and cracks.
  • Allow to harden for 45 minutes to one hour, then wipe off excessive Tile Grout with damp cloth or sponge.
  • Tile Grout should be cured by dampening the finished joint at least once during the first 24 hours. 

COVERAGE

12 to 16 Sq. Ft. per pound.


GUARANTEE

This product is guaranteed to be of the highest quality.  If the product is found to be defective we will replace the material at no charge.  Due to the possibility of improper use or application under adverse conditions, our liability shall not exceed the purchase price of this product.


CAUTION

Contains portland cement. Avoid eye contact or prolonged contact with skin.  Wash thoroughly after handling.  In case of eye contact, flush with plenty of water for at least 15 minutes. Consult a physician immediately.

KEEP OUT OF REACH OF CHILDREN. 


    

UPC NUMBER AND CARTON INFORMATION

STOCK NO. SIZE UPC NUMBER CARTON CUBIC FEET
04180   2 lb. 0  54647  04180 3  .86
04185   10 lb. 0  54647  04185 8  .776
GHS Safety Data Sheet
Buy Now