DESCRIPTION

Black Swan’s  PTFE Tape - Low Density - China is a clean, self-lubricating tape, which is used to make threaded connections. It offers a positive pressure seal to 10,000 lbs. PSI from a temperature range from -450 F to +500 F. Thickness is .0035 ± .0005.white, smooth, grit-free, homogenized PTFE pipe joint compound. Forms a film of PTFE over the threaded surface for lasting protection against leaks. Will not harden, crack or crumble. Meets Federal Specification TT-S-1732. NSF Certified.


RECOMMENDATIONS

Black Swan’s  PTFE Tape - Low Density - China can be used on threaded pipe, valves, fittings, accessories and controls made from all types of materials including:

ALUMINUM GLASS
BLACK IRON MONEL
BRASS NATURAL RUBBER
CHROME PLASTICS
COPPER STAINLESS STEEL
GALVANIZED SYNTHETIC RUBBER

 


CHEMICALLY RESISTANT TO:

  • AIR
  • ACID
    • hydrochloric
    • hydrofluoric
    • nitric
    • sulfuric
  • ANTI-FREEZES
  • BEVERAGES
  • CORROSIVE CHEMICALS
  • CAUSTICS:
    • ammonium hydroxide
    • concentrated sodium
    • potassium hydroxide
  • DISTILLED WATER
  • DRY CLEANING FLUIDS
  • ETHERS
  • ETHYLENE GLYCOL
  • FOOD PROCESSING SYSTEMS (approved by F.D.A.)
  • FREON REFRIGERANTS
  • GASES:
    • air
    • ammonia
    • butane
    • chlorine
    • hydrogen
    • chlorine
    • hydrogen
  • Gases cont.
    • L.P. gas
    • natural gas
    • nitrogen
    • tetraoxide
    • oxygen
    • propane
  • HYDRAULIC FLUIDS
  • JET FUELS
  • LIQUID OXYGEN
  • OILS
  • OXYGEN
  • PAINTS
  • PETROCHEMICALS
  • PLASTICS
  • PHARMACEUTICALS
  • SOLVENTS:
    • benzine
    • carbon
    • tetrachloride
    • esters
    • ketones
    • toluene
    • trichloroethylene
    • xylene
  • STEAM
  • WATER

Note: PTFE Tape is not for use on molton alkali, chlorine and fluorine at high temperature and pressure.   


 DIRECTIONS

  1. Apply Black Swan PTFE Tape to male threads as close as possible to end of threads. Hold end of Black Swan PTFE Tape firmly and wind clock wise on standard threads. Stretch tape tightly as you wind.
  2. Continue to wind and stretch tape so the tape seats into threads. Wind once around on joints under 2" and twice around on larger sizes.
  3. Complete winding and overlap starting point about 1". Tear tape by pulling in same direction as you were winding. Smooth torn end by running fingers over it. Make connection in usual manner.

BLACK SWAN PTFE TAPES

  1. PTFE TAPE - LOW DENSITY - CHINA - has a density of .37 g/cm3. The standard product used in the plumbing industry.
  2. PTFE TAPE - HIGH DENSITY - CHINA - has a density of .70 g/cm3. A heavy duty industrial tape to be used on the highest quality jobs.
  3. PTFE TAPE - YELLOW GAS LINE - CHINA - has a density of 1.2 g/cm3. This tape is specifically formulated to be used with gas lines.
  4. PTFE TAPE - PINK - WATER LINE - CHINA - has a density of .70 g/cm3. A heavy-duty industrial tape to be used on the highest quality jobs. This tape is specifically formulated to be used on oxygen lines.
  5. PTFE TAPE - GRAY - STAINLESS STEEL - U.S.A. - has a density of .70 g/cm3. A heavy-duty industrial tape to be used on the highest quality jobs. This tape is specifically formulated to be used on stainless steel pipe.
  6. PTFE TAPE - GREEN - OXYGEN LINE - U.S.A. - has a density of .70 g/cm3. A heavy-duty industrial tape to be used on the highest quality jobs. This tape is specifically formulated to be used on oxygen lines.
  7. PTFE TAPE - GRAY GHOST - CHINA - has a density of .07 g/cm3. High density PTFE tape.
  8. PTFE TAPE - LOW DENSITY - U.S.A. - has a density of .37 g/cm3. The standard product used in the plumbing industry.

   UPC NUMBER AND CARTON INFORMATION

PTFE TAPE - LOW DENSITY - CHINA
STOCK NO. SIZE UPC NUMBER CARTON CUBIC FEET
02086* ½" X 40" 0 54647 02086 0 .10
02088   ½" X 100" 0  54647  02088  4 .198
02090  ½" X 260" 0  54647  02090  7 .198
02090-10 ½" X 260" 0  54647  02090  7 .056
02090BK^ ½" X 260" 0  54647  02090  7 .198
02091** ½" X 260" 0  54647  02091  4 .056
02093* ½" X 300" 0  54647  02093  8 .10
02095  ½" X 520" 0  54647  02095  2 .056
02095-10 ½" X 520" 0  54647  02095  2 .198
02095BK^ ½" X 520" 0  54647  02095  2 .198
02100 ½" X 1296" 0  54647  02100  3 .198
02103  ¾" X 260" 0  54647  02103  4 .198
02105 ¾" X 520" 0  54647  02105  8 .198
02105BK^ ¾" X 520" 0  54647  02105  8 .198
02108 ¾" X 1296" 0  54647  02108  9 .198
02109 1" X 260" 0  54647  02109  6 .198
02110 1" X 520" 0  54647  02110  2 .198
02115  1" X 1296" 0  54647  02115  7 .198

* On Core Packed in a Bag

** 5 Rolls in a Bag

^ Packed in Display Bucket

GHS Safety Data Sheet          |          Buy Now